Workshop Manuals Factory service & repair Alfa Romeo
01 General data and specifications02 Maintenance03 Diagnosis – checks04 Engine (1.6 and 2.0 Twin Spark)05 Clutch06 Gearbox (manual and Selespeed)07 Front axle08 Brakes, ABS and traction control09 Steering10 Suspension and wheels11 Heating, air conditioning and washers12 Electrical equipment13 Body14 Body panels and reinforcement15 Wiring diagrams16 Connectors and pin-outs17 Wiring harnesses18 Fault diagnosis19 Special tools
Alfa Romeo 147 Factory Service Manual (2000-2002)18 · Fault diagnosis
18 · Diagnostics

H02 Drifting when braking

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2002
Section
Steering – car handling › H02 Drifting when braking
Fault diagnosisH02 Drifting when braking

H02 Drifting when braking

During braking, the car pulls to the right and/or left

StepTest procedureResultAction
0PRELIMINARY CHECKS

Check that the brake pedal is not too soft

OK

Move onto step 1

Brake pedal too soft

End of diagnosis

1CHECK FOR FLUID LEAKS

Check that there are no fluid leaks from:

  • calipers
  • master cylinder - condition of braking system
OK

Move onto step 2

Fluid leak from a front caliper

End of diagnosis

Fluid leak from a front caliper

End of diagnosis

2CHECK ON BRAKE WEAR

Check the state of wear of the brakes - condition of brake surfaces

OK

Move onto step 3

Brakes very worn
  • Overhaul the brakes

End of diagnosis

Brakes very worn
  • Clean and check for causes

End of diagnosis

3CHECK WHEEL GEOMETRY

Check the geometry and track of the wheel axle

OK

Move onto step 4

Front wheel geometry outside limits

End of diagnosis

Front wheel geometry outside limits

End of diagnosis

4CHECK WITH DIAGNOSTIC EQUIPMENT

Connect diagnostic equipment (Examiner or other instruments) to the diagnostic socket.

Check that there are no faults in the ABS control unit

OK

Move onto step 5

An error is detected in the control unit
  • Continue following the instructions for the diagnostic equipment

End of diagnosis

An error is detected in the control unit

End of diagnosis

5CHECK ON DRIFT

Disconnect the ABS control unit.

Check whether there is drifting during braking at variable speeds

OK

Move onto step 6

Vehicle does not drift during braking
  • Replace ABS control unit Op. 3340A12
  • Note: Carry out filling with the diagnostic instrument in active diagnosis

End of diagnosis

6CHECK ON CORRECT OPERATION

Test the vehicle before delivery to the customer, to check that the fault is no longer present.

NOTE: The test is essential, as the braking system involves a safety feature of the car

OK

Incorrect selection of diagnostic procedure

Fault persists

Incorrect selection of diagnostic procedure

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.