147 Factory Service Manual (2000-2002): Engine (1.6 and 2.0 Twin Spark)
Also for this vehicle: 147 Factory Service Manual (2000-2004).
General
Maintenance
Diagnostics
Engine
Transmission
Steering & suspension
Brakes
Heating & A/C
Electrical
Body & interior
Choose Sections to see everything in a chapter, or a chapter title to start at its first page.
General
Maintenance
Engine
Engine and power unit13 pages
- Power unit with manual gearbox - r + r (1.6 TS 120 CV)
- Power unit with manual gearbox - r + r (1.6 TS 105 CV)
- Power unit with manual gearbox with hydraulic selection - r r (2.0 TS Selespeed)
- Power unit (manual gearbox), removed, remove and re-build (1.6 TS)
- Power unit (manual gearbox), removed, remove and re-build (2.0 TS Selespeed)
- Engine - position on stand and remove (1.6 TS)
- Engine - position on stand and remove (2.0 TS)
- Engine, removed - remove cylinder head and oil sump for inspection - includes positioning on stand and removal (1.6 TS)
- Engine, removed - remove cylinder head and oil sump for inspection - includes positioning on stand and removal (2.0 TS)
- Engine - dismantle and re-build following operation 1004e10 - wash and check dismantled parts - re-fit cylinder head and
- Engine - dismantle and re-build following operation 1004e10 - wash and check dismantled parts - re-fit cylinder head and
- Engine removed, general overhaul (1.6 TS)
- Engine removed, general overhaul (2.0 TS)
Power unit mounts22 pages
- Power unit mounts – construction features (1.6 TS)
- Power unit mounts – construction features (2.0 TS)
- Gear box left rigid mount - r r (1.6 TS)
- Gear box left rigid mount - r r (2.0 TS)
- Rear rigid mount - r r (1.6 TS 120 CV)
- Rear rigid mount - r r (1.6 TS 105 CV)
- Rear rigid mount - r r (2.0 TS)
- Cam shaft left rigid mount - r r (1.6 TS)
- Cam shaft left rigid mount - r r (2.0 TS)
- Power unit front mount (timing side) flexible block - replace (1.6 TS)
- Power unit front mount (timing side) flexible block - replace (2.0 TS)
- Power unit intermediate mount flexible block - replace (1.6 TS 120 CV)
- Power unit intermediate mount flexible block - replace (1.6 TS 105 CV)
- Power unit intermediate mount flexible block - replace (2.0 TS)
- Gearbox side mount flexible block - replace (1.6 TS)
- Gearbox side mount flexible block - replace (2.0 TS)
- Power unit reaction link - replace (1.6 TS)
- Power unit reaction link - replace (2.0 TS)
- Body link bracket - r r (1.6 TS)
- Body link bracket - r r (2.0 TS)
- Link mount on engine - r r (1.6 TS)
- Engine link mount - r r (2.0 TS)
Cylinder head/s14 pages
- Cylinder head/s - various operations (1.6 TS 105 CV)
- Cylinder head/s - various operations (1.6 TS 120 CV)
- Cylinder head/s - various operations (2.0 TS)
- Single cam cover - r + r and replace gasket (1.6 TS)
- Single cam cover - r + r and replace gasket (2.0 TS)
- Ignition coil cover on cylinder head- r+r (1.6 TS)
- Ignition coil cover on cylinder head- r+r (2.0 TS)
- Cylinder head - r + r and replace gasket (1.6 TS 120 CV)
- Cylinder head - r + r and replace gasket (1.6 TS 105 CV)
- Cylinder head - r + r and replace gasket (2.0 TS)
- Single cylinder head, removed - overhaul (1.6 TS)
- Single cylinder head, removed - overhaul (2.0 TS)
- Single cylinder head, removed - r + r parts for grinding (1.6 TS)
- Single cylinder head, removed - r + r parts for grinding (2.0 TS)
Crank case sump and covers20 pages
- Crank case oil sump - r + r clean seals for sealant application (1.6 TS 120 CV)
- Crank case oil sump - r + r clean seals for sealant application (1.6 TS 105 CV)
- Crank case oil sump - r + r clean seals for sealant application (2.0 TS)
- Engine oil drain plug - replace (1.6 TS)
- Engine oil drain plug - replace (2.0 TS)
- Inspection cover on crank case sump - r + r and replace gasket (2.0 TS)
- Oil sump bulkhead - r r (1.6 TS)
- Oil sump bulkhead - r r (2.0 TS)
- Front crankshaft oil seal cover-r+r and replace seals for engines with oil pump on crankshaft and heat exchanger (1.6 TS
- Engind front cover - r r (1.6 TS)
- Engind front cover - r r (2.0 TS)
- Front crank shaft cover oil seal - replace (1.6 TS)
- Front crank shaft cover oil seal - replace (2.0 TS)
- Flywheel end oil seal - replace for manual gearbox with hydraulic selection versions (2.0 TS Selespeed)
- Flywheel side oil seal - replace (1.6 TS 120 CV)
- Flywheel side oil seal - replace (1.6 TS 105 CV)
- Flywheel end oil seal- r+r with flywheel removed (1.6 TS)
- Flywheel end oil seal- r+r with flywheel removed (2.0 TS)
- Oil seal cover (one) - l or r - on counter-rotating shafts - r + r and replace seals (2.0 TS)
- Front oil seal of one counter-rotating shaft, l or r - r + r (2.0 TS)
Crank shaft and flywheel13 pages
- Crank shaft – operation (1.6 TS)
- Crank shaft – operation (2.0 TS)
- Crank shaft - r + r with engine removed - check main and connecting rod bearingand replace if necessary (1.6 TS)
- Crank shaft - r + r with engine removed - check main and connecting rod bearingand replace if necessary (2.0 TS)
- Crankshaft phonic wheel for rpm and timing sensor-replace with crankshaft removed (1.6 TS)
- Crankshaft phonic wheel for rpm and timing sensor-replace with crankshaft removed (2.0 TS)
- Engine flywheel - r + r for versions with manual gearbox (1.6 TS 120 CV)
- Engine flywheel - r + r for versions with manual gearbox (1.6 TS 105 CV)
- Engine flywheel - r r for manual gearbox with hydraulic selection versions (2.0 TS Selespeed)
- Engine flywheel - r r with clutch or gearbox removed (1.6 TS)
- Engine flywheel - r r with clutch or gearbox removed (2.0 TS)
- Flywheel crown wheel - replacement for versions with manual gearbox (1.6 TS)
- Flywheel crown wheel - replacement for versions with manual gearbox (2.0 TS)
Pistons and connecting rods19 pages
- Connecting rods
- Pistons
- Connecting rods
- Pistons
- Connecting rod and piston set - r r (1.6 TS 120 CV)
- Connecting rod and piston set - r r (1.6 TS 105 CV)
- Connecting rod and piston set - r r (2.0 TS)
- Piston connecting rod set - r r (1.6 TS)
- Piston connecting rod set - r r (2.0 TS)
- Piston with connecting rod - r r (1.6 TS)
- Piston with connecting rod - r r (2.0 TS)
- Piston with connecting rod - r r (1.6 TS)
- Piston with connecting rod - r r (2.0 TS)
- Piston/cylinder liner - r r (1.6 TS)
- Piston/cylinder liner - r r (2.0 TS)
- Connecting rod small end bush - replace (1.6 TS)
- Connecting rod small end bush - replace (2.0 TS)
- Piston, pin set - replace (1.6 TS)
- Piston, pin set - replace (2.0 TS)
Timing system38 pages
- Toothed timing belt - r + r for timing adjustment or replacement (1.6 TS 120 CV)
- Toothed timing belt - r + r for timing adjustment or replacement (1.6 TS 105 CV)
- Toothed timing belt - r + r for timing adjustment or replacement (2.0 TS)
- Toothed drive pulley - r + r (1.6 TS)
- Toothed drive pulley - r + r (2.0 TS)
- Toothed driven pulley (one) - r + r (1.6 TS 120 CV)
- Toothed driven pulley (one) - r + r (1.6 TS 105 CV)
- Toothed driven pulley (one) - r + r (2.0 TS)
- Mobile timing system tensioner - r + r with timing belt removed (1.6 TS)
- Mobile timing system tensioner - r + r with timing belt removed (2.0 TS)
- Mobile timing system tensioner - r + r for 24 valve engines (1.6 TS)
- Mobile timing system tensioner - r + r for 24 valve engines (2.0 TS)
- Fixed timing system tensioner - r + r with timing belt removed (1.6 TS)
- Fixed timing system tensioner - r + r with timing belt removed (2.0 TS)
- Fixed timing system tensioner (one) r + r (1.6 TS)
- Fixed timing system tensioner (one) r + r (2.0 TS)
- Timing system protective cover(s) - r + r (1.6 TS)
- Timing system protective cover(s) - r + r (2.0 TS)
- Camshafts
- Hydraulic tappets
- Camshafts
- Hydraulic tappets
- Phase transformer
- Camshafts
- Hydraulic tappets
- Timing variator
- Camshaft in cylinder head - r r on vehicle (1.6 TS 120 CV)
- Camshaft in cylinder head - r r on vehicle (1.6 TS 105 CV)
- Camshaft in cylinder head - r r on vehicle (2.0 TS)
- Camshaft in cylinder head - r r with head removed (1.6 TS)
- Camshaft in cylinder head - r r with head removed (2.0 TS)
- Front oil seal of one overhead camshaft - replace with timing belt removed (1.6 TS 120 CV)
- Front oil seal of one overhead camshaft - replace with timing belt removed (1.6 TS 105 CV)
- Front oil seal of one overhead camshaft - replace with timing belt removed (2.0 TS)
- Timing variator on inlet camshaft in cylinder head r + r with shaft removed (1.6 TS 120 CV)
- Timing variator on inlet camshaft in cylinder head r + r with shaft removed (2.0 TS)
- Hydraulic tappet (one) - replaced with camshaft removed (1.6 TS)
- Hydraulic tappet (one) - replaced with camshaft removed (2.0 TS)
Fuel tank and pipe26 pages
- Fuel tank and pipe – construction features (1.6 TS)
- Fuel tank and pipe – construction features (2.0 TS)
- Immersed pump unit complete with fuel gauge sender unit
- Inertia switch
- Immersed pump unit complete with fuel gauge sender unit
- Inertia switch
- Fuel supply/return circuit pipe – operation (1.6 TS)
- Fuel supply/return circuit pipe – operation (2.0 TS)
- Fuel protections - fastenings – operation (1.6 TS)
- Fuel protections - fastenings – operation (2.0 TS)
- Fuel tank - r + r and decant fuel (1.6 TS)
- Fuel tank - r + r and decant fuel (2.0 TS)
- Fuel tank - r + r for replacement (1.6 TS)
- Fuel tank - r + r for replacement (2.0 TS)
- Fuel filler pipe - r + r (1.6 TS)
- Fuel filler pipe - r + r (2.0 TS)
- Fuel filler pipe housing seal - r r (1.6 TS)
- Fuel filler pipe housing seal - r r (2.0 TS)
- Plug for fuel filler pipe - r + r (1.6 TS)
- Plug for fuel filler pipe - r + r (2.0 TS)
- Submerged pump assembly complete with level guage control - r + r (1.6 TS)
- Submerged pump assembly complete with level guage control - r + r (2.0 TS)
- Inertia switch for electric pump supply circuit r + r (1.6 TS)
- Inertia switch for electric pump supply circuit r + r (2.0 TS)
- Fuel delivery line - r r (1.6 TS)
- Fuel delivery line - r r (2.0 TS)
Engine air supply circuit18 pages
- Engine air supply circuit – construction features (1.6 TS 105 CV)
- Engine air supply circuit – construction features (1.6 TS 120 CV)
- Engine air supply circuit – construction features (2.0 TS)
- Vacuum air circuit – operation (1.6 TS 105 CV)
- Vacuum air circuit – operation (1.6 TS 120 CV)
- Vacuum air circuit – operation (2.0 TS)
- Air cleaner filtering element - replace (1.6 TS)
- Air cleaner filtering element - replace (2.0 TS)
- Air cleaner filtering element - replace. (1.6 TS)
- Air cleaner filtering element - replace. (2.0 TS)
- Cold air intake - r r (1.6 TS)
- Cold air intake - r r (2.0 TS)
- Vacuum air circuit resonator pipe - r+r (1.6 TS)
- Vacuum air circuit resonator pipe - r+r (2.0 TS)
- Sleeve(s) from flow meter to air supply capacity case - r + r (1.6 TS)
- Sleeve(s) from flow meter to air supply capacity case - r + r (2.0 TS)
- Sleeve from air cleaner to flow meter - r + r (1.6 TS)
- Sleeve from air cleaner to flow meter - r + r (2.0 TS)
Fuel injection system35 pages
- Construction features
- General characteristics
- Operation
- Construction features
- General characteristics
- Operation
- MAP/flow meter signal plausibility
- Hot film air flow meter (debimeter) r + r (1.6 TS)
- Hot film air flow meter (debimeter) r + r (2.0 TS)
- Throttle body intergral with dvl - r r (1.6 TS)
- Throttle body intergral with dvl - r r (2.0 TS)
- Timing variator solenoids - r + r (1.6 TS 120 CV)
- Timing variator solenoids - r + r (2.0 TS)
- Coolant temperature sensor - r + r (1.6 TS)
- Coolant temperature sensor - r + r (2.0 TS)
- Cam angle sensor r + r (1.6 TS 120 CV)
- Cam angle sensor r + r (1.6 TS 105 CV)
- Cam angle sensor r + r (2.0 TS)
- Single fuel manifold pipe, with injectors - r + r (1.6 TS 120 CV)
- Single fuel manifold pipe, with injectors - r + r (1.6 TS 105 CV)
- Single fuel manifold pipe, with injectors - r + r (2.0 TS)
- Set of injectors - r + r with fuel manifold pipe removed - includes seal replacement (1.6 TS)
- Set of injectors - r + r with fuel manifold pipe removed - includes seal replacement (2.0 TS)
- Injector (one) - r + r with fuel manifold pipe removed - includes seal replacemnt (1.6 TS)
- Injector (one) - r + r with fuel manifold pipe removed - includes seal replacemnt (2.0 TS)
- Interruttore su pedale frizione - s.r. (1.6 ts)
- Run electronic ignition/injection control unit (single) self-learning procedure (1.6 TS)
- Run electronic ignition/injection control unit (single) self-learning procedure (2.0 TS)
- Injection/ignition system e.c.u. (one) - r + r (1.6 TS)
- Injection/ignition system e.c.u. (one) - r + r (2.0 TS)
- Ignition/injection system control unit mount - r r (1.6 TS)
- Ignition/injection system control unit mount - r r (2.0 TS)
- System cable bundle - r + r (1.6 TS 120 CV)
- System cable bundle - r + r (1.6 TS 105 CV)
- System cable bundle - r + r (2.0 TS)
Inlet and exhaust manifolds20 pages
- Operation
- Modular inlet manifold (v.i.s.) – switching device control actuator enablement solenoid (2.0 TS)
- Intake and exhaust system leakage check
- Inlet manifold - r + r and replace seal (1.6 TS)
- Inlet manifold - r + r and replace seal (2.0 TS)
- Sleeves connecting air capacity box to inlet manifold is - r+r (1.6 TS 120 CV)
- Sleeves connecting air capacity box to inlet manifold is - r+r (1.6 TS 105 CV)
- Sleeves connecting air capacity box to inlet manifold is - r+r (1.6 TS)
- Exhaust manifold - r r (1.6 TS 120 CV)
- Exhaust manifold - r r (1.6 TS 105 CV)
- Exhaust manifold - r r (2.0 TS)
- Exhaust manifold gasket - replace (1.6 TS 120 CV)
- Exhaust manifold gasket - replace (1.6 TS 105 CV)
- Exhaust manifold gasket - replace (2.0 TS)
- Exhaust manifold heat shield on bulkhead - r+r (1.6 TS 120 CV)
- Exhaust manifold heat shield on bulkhead - r+r (1.6 TS 105 CV)
- Exhaust manifold heat shield on bulkhead - r+r (2.0 TS)
- Modular inlet manifold - r+r (2.0 TS)
- Sleeves joining long air intake ducts to manifold case - replace with modular manifold removed (2.0 TS)
- Air flow switch control actuator r r (2.0 TS)
Exhaust pipes and silencers20 pages
- Exhaust pipes and silencers – construction features (1.6 TS 105 CV)
- Exhaust pipes and silencers – construction features (1.6 TS 120 CV)
- Exhaust pipes and silencers – construction features (2.0 TS)
- Exhaust pipe heat shield - r r (1.6 TS)
- Exhaust pipe heat shield - r r (2.0 TS)
- Catalytic converter heat shield - r r (1.6 TS 120 CV)
- Catalytic converter heat shield - r r (1.6 TS 105 CV)
- Catalytic converter heat shield - r r (2.0 TS)
- Exhaust pipe assembly r+r emission control versions (1.6 TS 120 CV)
- Exhaust pipe assembly r+r emission control versions (1.6 TS 105 CV)
- Exhaust pipe assembly r+r emission control versions (2.0 TS)
- Rear exhaust silencer - r+r emission control versions (1.6 TS 120 CV)
- Rear exhaust silencer - r+r emission control versions (1.6 TS 105 CV)
- Rear exhaust silencer - r+r emission control versions (2.0 TS)
- Intermediate exhaust silencer - r+r emission control versions (1.6 TS 120 CV)
- Intermediate exhaust silencer - r+r emission control versions (1.6 TS 105 CV)
- Intermediate exhaust silencer - r+r emission control versions (2.0 TS)
- Front catalytic converter attachment seal - replace (1.6 TS 120 CV)
- Front catalytic converter attachment seal - replace (1.6 TS 105 CV)
- Front catalytic converter attachment seal - replace (2.0 TS)
Emission control system44 pages
- Lambda sensors
- Catalytic converter
- Lambda sensors
- Catalytic converter
- Multi-function valves
- Canister
- Fuel vapour solenoid
- Multi-function valves
- Canister
- Fuel vapour solenoid
- Idling c.o. level - check with special equipment (1.6 TS)
- Idling c.o. level - check with special equipment (2.0 TS)
- Idling co level - check using special equipment and adjust speed (1.6 TS)
- Idling co level - check using special equipment and adjust speed (2.0 TS)
- Catalytic pre-converter - r r (1.6 TS 120 CV)
- Catalytic pre-converter - r r (2.0 TS)
- Lambda probe - r + r (1.6 TS 120 CV)
- Lambda probe - r + r (2.0 TS)
- Catalytic converter - r + r (1.6 TS 120 CV)
- Catalytic converter - r + r (1.6 TS 105 CV)
- Catalytic converter - r + r (2.0 TS)
- Left lambda probe r r (1.6 TS 120 CV)
- Left lambda probe r r (2.0 TS)
- Right lambda probe r r (1.6 TS 120 CV)
- Right lambda probe r r (2.0 TS)
- Front lambda probe with catalitic converter r r (1.6 TS 105 CV)
- Rear lambda probe with catalitic converter r r (1.6 TS 105 CV)
- Lambda probes all r r (1.6 TS 120 CV)
- Lambda probes all r r (1.6 TS 105 CV)
- Lambda probes all r r (2.0 TS)
- Pipe from engine oil vapour separator to intake - r + r (1.6 TS)
- Pipe from engine oil vapour separator to intake - r + r (2.0 TS)
- Tank fuel vapour separator - r + r (1.6 TS)
- Tank fuel vapour separator - r + r (2.0 TS)
- Active carbon filter for fuel vapours - r + r (1.6 TS)
- Active carbon filter for fuel vapours - r + r (2.0 TS)
- Enablement solenoid for flow of fuel vapour to inlet - r+r (1.6 TS)
- Enablement solenoid for flow of fuel vapour to inlet - r+r (2.0 TS)
- Pipe from fuel vapour separator to activated carbon filter - r r (1.6 TS)
- Pipe from fuel vapour separator to activated carbon filter - r r (2.0 TS)
- Tubazione vapori combustibile da filtro vapori a giunzione intermedia - s.r. (1.6 ts)
- Tubazione vapori combustibile da filtro vapori a giunzione intermedia - s.r. (2.0 ts)
- Tubazione vapori combustibile da giunzione intermedia a elettrovalvola vapori combustibile - s.r. (1.6 ts)
- Tubazione vapori combustibile da giunzione intermedia a elettrovalvola vapori combustibile - s.r. (2.0 ts)
Engine lubrication21 pages
- Engine lubrication – construction features (1.6 TS)
- Engine lubrication – construction features (2.0 TS)
- Engine oil lubrication circuit – engine oil pump (1.6 TS)
- Engine oil lubrication circuit – engine oil pump (2.0 TS)
- Engine oil - check level and top up if necessary (1.6 TS 120 CV)
- Engine oil - check level and top up if necessary (1.6 TS 105 CV)
- Engine oil - check level and top up if necessary (2.0 TS)
- Oil dip stick pipe - r r (1.6 TS 120 CV)
- Oil dip stick pipe - r r (1.6 TS 105 CV)
- Oil dip stick pipe - r r (2.0 TS)
- Engine oil pressure warning light switch - r + r (1.6 TS)
- Engine oil pressure warning light switch - r + r (2.0 TS)
- Engine oil pump, removed - check at bench (1.6 TS)
- Engine oil pump, removed - check at bench (2.0 TS)
- Emgine oil intake duct - r r (1.6 TS)
- Emgine oil intake duct - r r (2.0 TS)
- Engine oil filter r r (1.6 TS 120 CV)
- Engine oil filter r r (1.6 TS 105 CV)
- Engine oil filter r r (2.0 TS)
- Engine oil heat exchanger - r + r (1.6 TS 120 CV)
- Engine oil heat exchanger - r + r (2.0 TS)
Engine cooling45 pages
- Engine cooling – construction features (1.6 TS)
- Engine cooling – construction features (2.0 TS)
- Engine cooling tank - r + r – supply tank (1.6 TS)
- Engine cooling tank - r + r – radiator (1.6 TS)
- Engine cooling tank - r + r – supply tank (2.0 TS)
- Engine cooling tank - r + r – radiator (2.0 TS)
- Water pump and thermostat (1.6 TS)
- Water pump and thermostat (1.6 TS)
- Water pump and thermostat (2.0 TS)
- Water pump and thermostat (2.0 TS)
- Coolant temperature control devices – fans (1.6 TS)
- Coolant temperature control devices – combined sender unit for coolant temperature gauge and overheating warning light (
- Coolant temperature control devices – fans (2.0 TS)
- Coolant temperature control devices – combined sender unit for coolant temperature gauge and overheating warning light (
- Engine cooling tank - r + r (1.6 TS)
- Engine cooling tank - r + r (2.0 TS)
- Engine cooling radiator - r + r (1.6 TS)
- Engine cooling radiator - r + r (2.0 TS)
- Water pump - r + r (1.6 TS)
- Water pump - r + r (2.0 TS)
- Water pump - r + r with drive belt removed (1.6 TS 120 CV)
- Water pump - r + r with drive belt removed (1.6 TS 105 CV)
- Water pump - r + r with drive belt removed (2.0 TS)
- Water pump - r + r with engine removed (1.6 TS)
- Water pump - r + r with engine removed (2.0 TS)
- Thermostat- r + r (1.6 TS 120 CV)
- Thermostat- r + r (1.6 TS 105 CV)
- Thermostat- r + r (2.0 TS)
- Thermostat - r + r with cylinder head removed (1.6 TS)
- Thermostat - r + r with cylinder head removed (2.0 TS)
- Lower sleeve for coolant outlet from radiator - r + r (1.6 TS)
- Lower sleeve for coolant outlet from radiator - r + r (2.0 TS)
- Upper sleeve for coolant inlet to radiator - r + r (1.6 TS)
- Upper sleeve for coolant inlet to radiator - r + r (2.0 TS)
- Rigid pipe for coolant inlet to water pump - r + r (1.6 TS 120 CV)
- Rigid pipe for coolant inlet to water pump - r + r (1.6 TS 105 CV)
- Rigid pipe for coolant inlet to water pump - r + r (2.0 TS)
- Oil exchange sleeve - r r (1.6 TS 120 CV)
- Oil exchange sleeve - r r (2.0 TS)
- Radiator cooling fan - r + r (1.6 TS)
- Radiator cooling fan - r + r (2.0 TS)
- Resistor for radiator cooling fan - r + r (1.6 TS)
- Resistor for radiator cooling fan - r + r (2.0 TS)
- Radiator cooling fan/s wiring bundle - r r or replace (1.6 TS)
- Radiator cooling fan/s wiring bundle - r r or replace (2.0 TS)
Engine component miscellaneous drives14 pages
- Crankshaft pulley - r + r (1.6 TS)
- Crankshaft pulley - r + r (2.0 TS)
- Counter-rotating shaft drive toothed belt - r + r (2.0 TS)
- Counter-rotating shaft drive toothed belt tensioner - r + r with toothed belt removed (2.0 TS)
- Counter-rotating shaft drive toothed belts drive pulley - r + r with toothed belt removed (2.0 TS)
- Counter-rotating shaft pulley - r + r with toothed belt removed (2.0 TS)
- Single engine belt r r (1.6 TS)
- Single engine belt r r (2.0 TS)
- Engine component single belt mobile tensioner - r + r (1.6 TS)
- Engine component single belt mobile tensioner - r + r (2.0 TS)
- Engine component single belt mobile temperature - r rwith belt removed (1.6 TS)
- Engine component single belt mobile temperature - r rwith belt removed (2.0 TS)
- Engine component single belt fixed tensioner - one - r + r (1.6 TS)
- Engine component single belt fixed tensioner - one - r + r (2.0 TS)
Transmission
Steering and suspension
Brakes
Electrical
Heating and air conditioning
Body
Diagnostics