K25 Engine coolant fluid temperature gauge not working
- Make
- Alfa Romeo
- Model
- 156 Factory Service Manual
- Year
- 1997–2002
- Section
- Instruments › K25 Engine coolant fluid temperature gauge not working
K25 Engine coolant fluid temperature gauge not working
With the ignition key in the ON position, the coolant temperature gauge indicator on the central instrument is not working properly (it indicates a different level from the true engine value)
| Step | Test procedure | Result | Action |
|---|---|---|---|
| 1 | CHECKING CENTRAL INSTRUMENT ELECTRICAL CIRCUIT Check:
(Wiring diagram E4023 AUXILIARY INSTRUMENT(DASHBOARD CENTRE) ). | OK | |
| Component defective |
End of diagnosis | ||
| Connections broken |
End of diagnosis | ||
| 2 | CHECKING TEMPERATURE SENDER UNIT Checking operation of engine coolant temperature sender unit | OK | |
| Sender unit defective |
End of diagnosis | ||
| 2 | CHECKING TEMPERATURE SENDER UNIT Check that the engine coolant temperature sender unit is working properly: | OK | |
| Sender unit defective |
End of diagnosis | ||
| 3 | CHECKING THE CENTRAL INSTRUMENT Check the central instrument is working properly, particularly the engine coolant temperature signal check device see DESCRIPTION AND OPERATION: 5560 Instruments (see 5560F) | OK | |
| Device not working |
End of diagnosis | ||
| 4 | CHECK CORRECT OPERATION Check that the fault is no longer present | OK | End of diagnosis |
| Fault persists | Incorrect selection of diagnostic procedure |
Parts & tools for this job For 1997 Alfa Romeo 156
- PARTEngine gasket setSearch: Alfa Romeo 156 1997 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.