Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo 159 Factory Service Manual (2005-2011)23 · Fault diagnosis
23 · Diagnostics

Rear seat backrest knock

Make
Alfa Romeo
Model
159 Factory Service Manual
Year
2005–2011
Section
Noise / vibrations › Rear seat backrest knock
Fault diagnosisRear seat backrest knock

REAR SEAT BACKREST KNOCK

Noise, knocking whilst driving

1CHECK ON MATCHING BETWEEN STRIKERS AND LOCKALL OKPROBLEMS ENCOUNTEREDACTION
Check the matching between the strikers and the lock (or lock mounting bracket on backrest frame).Move on to Step 2Interference between matching elements (striker not correctly positioned).Adjust strikers and lubricate with Krytox grease.
2CHECK ON STIKER SURFACE LAYERALL OKPROBLEMS ENCOUNTEREDACTION
Check the superficial layer of the finishing treatment (bare metal on show) for the strikers and impressions/distortions on the lock fork.End of diagnosis1.Superficial layer of finish damaged (bare metal on show)1.Replace the striker and lubricate with Krytox grease.
2. Impressions on lock attachment elements.2. Replace the lock and lubricate with Krytox grease.

Parts & tools for this job For 2005 Alfa Romeo 159

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.