Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo Brera and Spider Factory Service Manual (2005-2010)23 · Fault diagnosis
23 · Diagnostics

P0234 - turbo pressure

Make
Alfa Romeo
Model
Brera and Spider Factory Service Manual
Year
2005–2010
Section
Examiner - diesel electronic management › P0234 - turbo pressure
Fault diagnosisP0234 - turbo pressure

P0234 - TURBO PRESSURE

2.4 JTD 20v

The diagnostic equipment signals: Error P0234 (Supercharging pressure).

This error is detected if the supercharging pressure is too high or too low. As a result, the exhaust gas recirculation valve is switched off and the supercharging pressure can longer be controlled.

0Preliminary checksALL OKPROBLEMS ENCOUNTEREDACTION

Check that the engine oil level is correct

Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY

Check that the air intake/vacuum circuit is working properly by carrying out the

See Test 1048OA AIR INTAKE/VACUUM CIRCUIT CHECK

Check the condition of the fuel supply circuit and make sure that it is working properly carrying out the

See Test 1040OA FUEL SUPPLY CIRCUIT CHECK

Check the operation of the low pressure supply circuit by carrying out the

See Test 1060OB CHECK ON SUPPLY LOW PRESSURE FUEL CIRCUIT

Move on to Step 1Oil level incorrect

Restore the correct engine oil level

Op. 0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY

1Ambient parameters checkALL OKPROBLEMS ENCOUNTEREDACTION

Select the following control unit at the diagnostic equipment: EDC16C39 Diesel electronic injection control unit.

Check the value of the following parameters:

  • Supercharging pressure Objective
  • Supercharging pressure Measured
  • Overboost valve closure

See Test 1060GF

End of diagnosis

Parts & tools for this job For 2005 Alfa Romeo Brera

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.