Cruise control recall control not working

Make: Alfa Romeo
Model: GT Factory Service Manual
Year: 2003–2010
Section: Engine › Cruise control recall control not working

‹ Prev Cruise control not working under any conditions Next › Cruise control set+ control not working

Fault diagnosisCruise control recall control not working

CRUISE CONTROL RECALL CONTROL NOT WORKING

1.8 T.SPARK, 2.0 JTS, 3.2 V6

After deactivating the Cruise Control system by pressing the brake/clutch pedal, using the ''RESUME'' button on the Cruise Control, the speed set previously is not restored.

1	CHECK ON RESUME COMMAND	All OK	Problems met	Operation
		Results of the tests
	Check that the Cruise Control contacts work properly in the RESUME position	Continue to Step 2	Lack of continuity	Replace the steering column switch unit lever with the Cruise Control lever incoroporated Op. Op. 5580A10 CRUISE CONTROL LEVER ASSEMBLY - R+R
2	CHECK CONNECTIONS TO ENGINE MANAGEMENT CONTROL UNIT	All OK	Problems met	Operation
	With the ignition ON and the Cruise Control ON and RESUME, check that there is a voltage signal from the Cruise Control system to the engine management control unit See See E5060 CRUISE CONTROL	Continue to Step 3	No voltage found	Restore the connections See See E5060 CRUISE CONTROL
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
1.9 JTD 16V	Check that the fault is no longer present	End of diagnosis	Fault persists: control unit defective	Replace the engine management control unit Op. Op. 1060G80 DS ELECTRIC INJECTION CONTROL UNIT - R R
2.0 JTS 3.2 V6	Check that the fault is no longer present	End of diagnosis	Fault persists: control unit defective	Replace the engine management control unit Op. 1056B82

‹ Prev Cruise control not working under any conditions Next › Cruise control set+ control not working

Parts & tools for this job For 2003 Alfa Romeo GT

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.