The cruise control set- control is not working
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Engine › The cruise control set- control is not working
‹ Prev Cruise control system does not go off when brake pedal pressedNext › Clutch not releasing correctly
Fault diagnosisThe cruise control set- control is not working
THE CRUISE CONTROL SET- CONTROL IS NOT WORKING
The Cruise Control system does not reduce the speed when the ring nut is turned to
| Results of the tests | ||||
| 1 | SELECTOR OPERATION CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check that the Cruise Control contacts work properly in the - position | Continue to Step 2 | Lack of continuity | Replace the steering column switch unit lever with the Cruise Control lever incoroporated Op. | |
| 2 | CHECK ON SUPPLY | All OK | Problems met | Operation |
With the ignition ON and the Cruise Control ON and at -, check that there is a voltage signal from the Cruise Control system to the engine management control unit: See | Continue to Step 3 | No voltage found | Restore the connections See | |
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| 1.9 JTD 16V | Check that the fault is no longer present | End of diagnosis | Fault persists: control unit defective | Replace the engine management control unit Op. |
2.0 JTS 3.2 V6 | Check that the fault is no longer present | End of diagnosis | Fault persists: control unit defective | Replace the engine management control unit Op. 1056B82 |
‹ Prev Cruise control system does not go off when brake pedal pressedNext › Clutch not releasing correctly
Parts & tools for this job For 2003 Alfa Romeo GT
- PARTEngine gasket setSearch: Alfa Romeo GT 2003 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.