Mounting Angle
- Make
- Aston Martin
- Model
- DB7 Factory Workshop Manual Volume 2: Electrics, Body and Air Conditioning
- Year
- 1994–1998
- Section
- Air conditioning procedures › Mounting Angle
Air conditioningMounting Angle
Mounting Angle
| Mounting Angle | Acceptable Oil Level |
|---|---|
| 0° | 3-5 |
| 10° | 4-6 |
| 20° | 5-7 |
| 30° | 6-8 |
| 40° | 7-9 |
| 50° | 8-10 |
| 60° | 9-11 |
| 90° | 10-12 |
If the level indicated on the dipstick does not match the increments given in the table for a particular mounting angle, add or subtract oil to the midpoint value.
- Ensure that the “O” ring seal and seat are clean. Coat the seal with compressor oil and refit the oil filler plug.
- Torque tighten the plug to 8-12 Nm. Do not over tighten the plug to stop a leak. If necessary, remove the plug and fit a new oil seal.
- Refit the compressor.
- Recharge the system with refrigerant.
Parts & tools for this job For 1994 Aston Martin DB7
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Aston Martin DB7 1994 cabin filter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.