5 Series E34 525td (M51) TOUR
Apply permanently elastic Drei Bond 1209 sealing compound to
the joints between the timing-case cover and the engine block,
refer to BMW Parts Service.
Caution!
The tapped bores in the engine block must be dirt and oil-free.
(Risk of cracks, incorrect tightening values).
Lay on new cylinder-head gasket with previously determined
gasket thickness (number of holes).
Caution!
Rotate engine into 30
°
before TDC setting.
Rotate engine on central screw counter-clockwise to approx.
30
°
before TDC.
This prevents contact between valves and pistons.
RA Removing and installing cylinder head (M51)
BMW AG - TIS
23.01.2013 06:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
