5 Series E34 525td (M51) TOUR
Fit cylinder head and tighten down using new screws (slightly
oiled) in sequence 1 ... 14
Tightening torque,
refer to Technical Data 11 12 5AZ
Use Special Tool 11 2 110 or 00 9 120 for torsion angle
tightening.
Tighten screw connection at timing-case cover.
Note:
Screw connection (1) is arranged as a stud bolt with a nut.
Tighten left and right screw connections.
Fit line for leakage oil on injector valve.
RA Removing and installing cylinder head (M51)
BMW AG - TIS
23.01.2013 06:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -