5 Series E34 525td (M51) TOUR
Note:
Replace O-ring.
Install sliding rail, tighten bearing pin for chain guide.
Note:
Replace O-ring.
Install tensioning rail, tighten down bearing pin for tensioning rail.
Rotate camshaft until valves on cylinder 6 are correctly aligned.
(Cylinder 1 = working stroke)
Note:
Camshaft can be rotated using the hex. head.
Secure camshaft with Special Tool 11 3 320.
RA Removing and installing cylinder head (M51)
BMW AG - TIS
23.01.2013 06:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -
