Stratus L4-2.4L DOHC (1995)
3. Install timing belt. Starting at the crankshaft, go around the water pump sprocket, idler pulley, camshaft sprockets and then around the tensioner.
4. Move the exhaust camshaft sprocket counterclockwise to align marks and take up belt slack.
NOTE: A new tensioner is held in the wound position by a pull pin.
5. Remove the pull pin or Allen wrench from the belt tensioner.
6. Rotate crankshaft 2 revolutions and check the alignment of the timing marks.
7. Install right engine mount and support bracket.
8. Install upper timing belt cover bolts 4.5 Nm (40 inch lbs.).
9. Install the lower timing belt cover bolts 4.5 Nm (40 inch lbs.).