Removing-refitting

Removing-refitting

• Position the vehicle on a lift.
• Disconnect the negative battery terminal.
• Detach the exhaust manifold heat shield as described in the appropriate paragraph.

1. Disconnect the electrical connection for the front Lambda sensor and release the wiring from the bands.

2. Disconnect the electrical connection for the rear Lambda snsor and release the wiring from the retaining bands.
3. Undo the nuts fixing the manifold to the cylinder head.
4. Undo the nuts fixing the catalytic converter to the rear section of the exhaust manifold, undo the bolt for the mounting bracket and detach the exhaust manifold with the catalytic converter.