Paado3bos (page 3 of 3)

1. Lower the hydraulic jack and remove power unit from lower part of vehicle.

Lower hydraulic jack gradually and check power unit is properly positioned and balanced on the support tool.

2. Position power unit on a platform using a hydraulic lift.

Do not move the power unit when fitted on hydraulic jack. Use a hydraulic lift fitted with tools 1860592000 to move the power unit after releasing from support tool.

NOTE To refit the power unit, simply reverse order of removal instructions.

• - Prepare the engine bay to fit the power unit. Take care to connect all electrical leads, pipes etc. in order to avoid any possible hitches;
• - Take great care not to damage individual components when the power unit is fitted
• - When fitting the coolant lines, align groove on rubber hose with ridge on associated rigid sleeve. When filling the cooling system, refer to section on "Removing-refitting radiator".

First secure engine end mount by tightening retaining bolts to the body by the specified torque. Then secure gearbox end mount and lastly the central differential end mount. Ensure that the power unit mounting points are properly secured.

Clutch pedal height.