Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Replacing timing belt (1581 16v) › Refitting
10 EngineRefitting
Diagram showing a dial gauge tool (part number 1895762000) being used to check the tension of a power steering pump drive belt.
Diagram showing the engine bay area with an air intake line and associated components.

Refitting

  1. Tension power steering pump drive belt by adjusting regulation screw: use tool 1895762000 to check tension is between 32 - 45 daN within 30 minutes of fitting the new belt.

REMOVING-REFITTING TIMING BELT

Before removing the timing belt, remove the auxiliary belt as described previously

Diagram showing a dial gauge (part number 1860895000) mounted against cylinder no. 1 to record t.d.c. on the crankshaft.
  1. Remove the air intake line shown in the figure.
  2. Remove the spark plugs and position the gauge against cylinder no. 1 using mount 1860895000. Turn the crankshaft to record t.d.c.
  3. Check that notch (1) on the alternator belt drive pulley on the crankshaft, is aligned with the reference mark (2) located on the lower timing belt guard. Check that notch on flywheel is aligned with the reference mark on the bell housing, as shown in the box.
Diagram showing the alignment of notch (1) on the alternator belt drive pulley with reference mark (2) on the lower timing belt guard, and the flywheel alignment mark on the bell housing.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.