Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Setting timing to "0"

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Replacing timing belt (1581 16v) › Setting timing to "0"
10 EngineSetting timing to "0" · page 1 of 4
Diagram showing the lower flywheel protection case and a close-up of the flywheel retainer tool 1860771000 in position.
Diagram showing the alternator belt drive pulley on the crankshaft with arrows indicating removal.
Diagram showing the timing belt cover being removed, with icons indicating upward and downward fastening directions.
  1. Remove lower flywheel protection case from bell housing, then position flywheel retainer 1860771000.
  2. Remove alternator belt drive pulley on crankshaft.
  3. Remove timing belt cover. Lower fastenings are shown in the box.
  4. Loosen automatic belt tensioner fastening nut in order to release belt tension. Then remove the belt.

SETTING TIMING TO "0"

  1. Loosen camshaft pulley retaining bolts using tool 1860885000 fitted to mount 1860831001 as a reaction tool.
Diagram showing the timing belt installed on the crankshaft and camshaft pulleys.
Diagram showing the camshaft pulleys with tools 1860885000 and 1860831001 fitted to retain them.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.