Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Setting timing to "0" (page 3 of 4)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Replacing timing belt (1581 16v)
10 EngineSetting timing to "0" · page 3 of 4
Timing belt fitted around crankshaft and camshaft sprockets
Auxiliary component drive pulley and timing belt assembly on engine front
Close-up of auxiliary component drive belt tensioner and timing belt
Fixed timing indicator gauge positioned against flywheel with part number 1860896000 visible
  1. Fit timing belt onto crankshaft pinion.
  2. With flywheel retainer 1860771000 fitted, fit auxiliary component drive pulley to the crankshaft and tighten retaining nut to a torque of 22 daNm. Then remove flywheel retainer.
  3. Remove auxiliary component drive belt tensioner by undoing fastenings in order to allow tool to be secured so that timing can be set to "0".
  4. Use gauge to recheck that cylinder no. 1 is at t.d.c. The use timing belt cover retaining screw to secure fixed indicator shown in the figure into screw seat.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.