Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Replacing auxiliary component belt

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Replacing timing belt (1929 D) › Replacing auxiliary component belt
10 EngineReplacing auxiliary component belt

Replacing auxiliary component belt

Diagram showing the alternator and drive belt with adjust screw labeled 1
Diagram showing the alternator and coolant pump pulleys with the drive belt installed

  1. Loosen upper alternator retaining bolts and adjust screw (1) to slacken tension of alternator - coolant pump drive belt.
  2. Prise alternator - coolant pump drive belt from pulleys.

Refitting and tensioning

  1. Reverse removal procedure. Check that new belt tension is between 63 - 80 daN, measured using tool 1895762000.

REMOVING-REFITTING POWER STEERING PUMP DRIVE BELT

Refer to instructions in section 41 of this manual for power steering pump belt removal-refitting.

  1. Once power steering drive belt is in place, check that belt tension is between 40 - 55 daN, measured using tool 1895762000.
Close-up diagram of a hand using tool 1895762000 to measure belt tension on the alternator pulley
Close-up diagram of a hand using tool 1895762000 to measure belt tension on the power steering pump pulley

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.