Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting timing belt

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Replacing timing belt (1929 D) › Removing-refitting timing belt
10 EngineRemoving-refitting timing belt · page 1 of 2
Diagram showing the timing belt cover and associated components on the engine side
Close-up diagram of the pulley and timing belt alignment marks

REMOVING-REFITTING TIMING BELT

Before removing the timing belt, remove the compressor drive belt (for air conditioned vehicles) and the alternator - coolant pump drive belt.

  1. Remove the upper timing belt cover.
  2. Check that the notch on the pulley (damping flywheel) is aligned with the ridge on the lower timing belt cover.
  3. Remove the lower timing belt cover.
  4. Remove the lower flywheel cover from the gearbox bell housing.
Diagram illustrating the removal of the lower flywheel cover from the gearbox bell housing area

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.