Hydraulic test (page 2 of 2)

P4A34AB01

• chock the vehicle by placing wedges under the wheels;
• apply the handbrake fully;
• press the brake pedal down hard with the left foot;
• start the engine, warm it up to temperature and check that the idle speed is correct;
• move the selector lever to position D;
• read the measurement of the line pressure during idling;
• fully press the accelerator pedal with the right foot and quickly read the line pressure at the engine's stall speed.

The stall speed test must not exceed 5 seconds in duration.

Repeat the last two operations with the selector lever on position R.