Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing-refitting (page 4 of 4)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1929 D)
21 Gearbox and differentialRemoving-refitting · page 4 of 4
Diagram showing the lower section of the power unit and gearbox with arrows pointing to mounting bolts on the bellhousing and support bracket.
Close-up diagram of the bellhousing area with an arrow indicating a specific bolt location for the support tool.
Diagram illustrating the removal of the central power unit mounting, with icons indicating lifting and lowering actions.
  1. Remove the bottom flywheel guard from the bellhousing.
  2. Undo the bolt shown in the figure on the bellhousing, to enable the gearbox support tool to be installed.
  3. Remove the power unit central mounting to enable the gearbox support tool to be subsequently installed.
  4. Place the gearbox support tool 1860873000 on the hydraulic jack, then secure it to the gearbox at the points shown in the figure (front view and rear view).
Front view diagram showing the gearbox support tool 1860873000 attached to the gearbox.
Rear view diagram showing the gearbox support tool 1860873000 attached to the gearbox.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.