Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing-refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (98 range) › Removing-refitting
21 Gearbox and differentialRemoving-refitting · page 1 of 2

Removing-refitting

Diagram showing the gearbox side drive shaft being disconnected from the differential with an arrow indicating movement away from the work area.
Diagram showing the timing side drive shaft being disconnected using leverage at the engagement point with an arrow indicating movement away from the work area.
  1. Disconnect the gearbox side drive shaft from the differential using leverage at the engagement point and move it away from the work area.
  2. Disconnect the timing side drive shaft using leverage at the engagement point; then move the driveshaft away from the work area.
  3. Undo the lower bolts fixing the starter motor to the gearbox, disconnect the electrical connections then remove the actual starter motor.
  4. Remove the engine flywheel shield acting on the fixing bolts.
  5. Undo the bolt fixing the gearbox to the engine.
Diagram showing the lower bolts fixing the starter motor to the gearbox and the electrical connections.
Diagram showing the engine flywheel shield and its fixing bolts.
Diagram showing the bolt fixing the gearbox to the engine.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.