Removing-refitting

REMOVING-REFITTING

Removing

Position the vehicle on a lift, remove the front wheels then proceed as described below:

1. Undo the three fixing bolts and remove the air intake disconnecting it firstly from the air filter.
2. Disconnect the negative battery lead, remove the protective cover for the positive pole, disconnect the terminal and separate the latter from the starter motor supply leads; undo the nut securing the battery to the drip tray, then remove the latter from the engine compartment.
3. Undo the bolt securing the relay casing cover and remove it, then undo the nuts fixing the casing to the battery drip tray and place the casing at the side.
4. Remove the battery drip tray undo the bolts fixing it to the bodyshell.