Removing-refitting (page 2 of 4)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Removing-refitting (98 range)

21 Gearbox and differentialRemoving-refitting · page 2 of 4

1. Disconnect the connector for the reversing lights switch and the earth cable.
2. Acting on the nut (1) and the lock nut (2), disconnect the clutch cable from the control lever.
3. Disconnect the end of the gear engagement cable and undo the bolts fixing the mounting bracket.
4. Disconnect the end of the gear selection cable, then move the selection and engagement cables to the side of the engine compartment.
5. Undo the upper bolts (1) fixing the gearbox to the engine and the bolt (2) fixing the starter motor to the gearbox.

04 Transmission