Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing-refitting (page 4 of 4)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (98 range)
21 Gearbox and differentialRemoving-refitting · page 4 of 4
Diagram showing the dust shield and its fixing button on the bodyshell
Illustrates removal of bolt securing door hinge bracket
Diagram showing the shock absorber bolts and brake pipe connection to the steering knuckle
  1. Remove the button fixing the dust shield to the bodyshell, then undo the bolts and release the shield from the housing. Repeat the operation for the dust shield on the other side.
  2. Remove the bolts fixing the shock absorber to the steering knuckle and rotate the steering knuckle towards the inside, releasing the brake pipe from the shock absorber. Repeat the operation on the other side.
  3. Undo the fixing nut the steering track rod end to the steering knuckle, then, using tool 1847038000, disconnect it from the steering knuckle. Repeat the operation for the steering track rod end on the other side.
  4. Position a container for recovering the transmission fluid, then undo the plug shown and drain the oil from the gearbox.
Close-up diagram of the steering track rod end being disconnected with tool 1847038000
Diagram showing the gearbox drain plug location with an arrow pointing to it

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.