Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)05 · 33 Braking system
05 · General

Brake caliper

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Rear brakes › Brake caliper
33 Braking systemBrake caliper

BRAKE CALIPER

Dismantling

Place the caliper in a vice, fitting the protections, then proceed as described below:

  • undo the connector and remove the brake hose;
  • undo the bleed screw and remove it;

NOTE The hose must not be swollen or cracked, otherwise it must be replaced. It is advisable to replace both hoses.

Hand using a tool to undo the connector on the brake caliper hose
Hand undoing the bleed screw on the brake caliper
  • remove the piston and dust excluder using tool 1856133000;
Tool 1856133000 being used to remove the piston and dust excluder from the caliper
  • remove the seal.
Hand removing the seal from the brake caliper

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.