Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)06 · 41 Steering
06 · Steering & suspension

Removing-refitting (page 2 of 3)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Power steering pump
41 SteeringRemoving-refitting · page 2 of 3
Diagram showing the power steering pump link and bracket secured to the engine compartment

Working from the engine compartment, carry out the following operations:

  1. undo the two bolts securing the link to the engine and the bracket, and remove the link;
Diagram showing the power steering pump bracket and link secured to the bodywork with arrows indicating bolt locations
  1. undo the bolts securing the bracket and link to the bodywork and remove the bracket;
  2. disconnect the wiring connector and earth cable;
  3. disconnect the fluid inlet and outlet pipes from the power steering pump.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.