Dismantling-refitting
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Rear suspension › Dismantling-refitting
44 Suspension and wheelsDismantling-refitting
Rear suspension on overhaul stand
DISMANTLING-REFITTING
Dismantling anti-roll bar from attachments on trailing arm
Anti-roll bar
Check that the anti-roll bar is not damaged or deformed, otherwise it will have to be replaced.
Check that the rubber grommets are not damaged.
Dismantling brake pipes from attachments on rear torsion bar
NOTE Whenever the brake pipes are removed, check with compressed air that they are not blocked. They should be replaced if they have dents, constrictions, cracks or worn connections.
Parts & tools for this job For 1995 Fiat Bravo
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTRear shock absorbersSearch: Fiat Bravo 1995 rear shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.