Suspension assembly

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Rear suspension › Suspension assembly

44 Suspension and wheelsSuspension assembly

Suspension assembly

To remove the rear suspension assembly, proceed as follows:

1. disconnect the brake pipe connections;
2. slacken the handbrake cable assembly and disconnect the cables;
3. unscrew and move aside the A.B.S. sensor;
4. place a hydraulic jack under the suspension crossframe and undo the bolts securing the suspension to the body; lower the hydraulic jack and remove the rear suspension assembly.

07 Steering & suspension