55D.

55D.

The brake lights are not working, but the additional brake light is working (Valid for EL/ELX/HGT versions)

Check for voltage at the R coloured cable connector C pin 7 of the instrument panel 6 Not OK Restore the continuity of the R coloured cable between the instrument panel 6 connector C & the junction unit 4 connector H, or overhaul the unit 4

OK

Bridge the N coloured cable at the instrument panel 6 connector C pin 15 with an earth OK Restore the continuity of the N coloured cable between the instrument panel 6 & the earth on dashboard 42

OK

Check for voltage at the AR cable of the instrument panel 6 connector C pin 4 Not OK Restore the continuity for the AR coloured cable between the instrument panel 6 connector C & the ultrasound welding

OK

Check for voltage at the RN coloured cable of the instrument panel 6 connector C pin 3 Not OK Overhaul or replace the brake lights failure control circuit, or overhaul the instrument panel 6

The left brake light is not working (Valid for EL/ELX/HGT versions )

Check the condition of the bulb Not OK Replace the bulb

OK