55D.
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Connectors › 55D.
55 Electrical system55D. · page 1 of 2
55D.
↓
- Bridge the B coloured cable at the receiver 107A with an earth
| Not OK | Restore the continuity of the B coloured cable between the receiver 107A and the connector 28 |
↓
| OK |
↓
- Check the condition of the receiver 107A
| Not OK | Overhaul or replace the receiver 107A |
The central locking is not working operated by the alarm device control unit
- Bridge MB coloured cable btwn connectors 28 & 70
| OK | Restore the continuity of the MB coloured cable between connectors 28 & 70 |
↓
| Not OK |
↓
- Bridge the MB coloured cable between the alarm control unit 100 connector A pin 2 and the receiver 107A
| OK | Restore the continuity of the MB coloured cable between the alarm control unit 100 and the receiver 107A |
↓
| Not OK |
↓
- Check the condition of the receiver 107A
| Not OK | Overhaul or replace the receiver 107A |
↓
| OK |
↓
- Check the condition of the alarm control unit 100
| Not OK | Overhaul or replace the control unit 100 |
Parts & tools for this job For 1995 Fiat Bravo
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.