Fault diagnosis Analytical charts

Fault diagnosis Analytical charts

The central locking does not lock the doors operated by the right front lock

1. OK
2. Extract connectors 112 & 110 from their housings, bridge A/B coloured cables at the control unit connector 112 & insert an ohmmeter between the A/B coloured cables of the lock assy 110

• Not OK → Restore the continuity of the A coloured cable between the connector 35 and the lock assembly 110

3. OK
4. Bridge the A/N coloured cables at the left front lock assembly 110

• OK → Overhaul or replace the lock assembly 110

5. Not OK
6. Check the condition of the left front lock assembly 110

• Not OK → Overhaul or replace the lock assembly 110

7. Bridge the N coloured cable at the right front central locking 111 with an earth

• OK → Restore the continuity of the N coloured cable between the central locking 111 and the earth on dashboard 42

8. Not OK