55D.

55D.

The right front central locking motor is not working

1. Extract connectors 112 and 36 from their housings, bridge the H/G coloured cables at the central locking control unit connector 112 and insert an ohmmeter between the H/G coloured cables of connector 36
2. Not OK
3. Restore the continuity for the H/G coloured cables between the ultrasound welding and the connector 36
4. OK
5. Extract connectors 36 and 111 from their housings, bridge the H/G coloured cables at connector 36 and insert an ohmmeter between the H/G coloured cables at the lock assy connector 111
6. Not OK
7. Restore the continuity for the H/G coloured cables between the connector 36 and the lock assembly 111
8. OK
9. Check the condition of the right front central locking motor 111
10. Not OK
11. Overhaul or replace the central locking motor 111

The left rear central locking motor is not working (Non-existent for the Bravo versions)

1. Extract connectors 112 and 86 from their housings, bridge the H/G coloured cables at the central locking control unit connector 112 and insert an ohmmeter between the H/G coloured cables of connector 86
2. Not OK
3. Restore the continuity for the H/G coloured cables between the ultrasound welding and the connector 86
4. OK