55D. (page 2 of 2)

The left front central locking motor is not working

1. Extract connectors 112 and 35 from their housings, bridge the H/G coloured cables at the central locking control unit connector 112 and insert an ohmmeter between the H/G coloured cables of connector 35

• Not OK
• Restore the continuity for the H/G coloured cables between the ultrasound welding and the connector 35

2. OK
3. Extract connectors 35 and 110 from their housings, bridge the H/G coloured cables at connector 35 and insert an ohmmeter between the H/G coloured cables at the lock assy connector 110

• Not OK
• Restore the continuity for the H/G coloured cables between the connector 35 and the lock assembly 110

4. OK
5. Check the condition of the left front central locking motor 110

• Not OK
• Overhaul or replace the central locking motor 110