Roof lining (page 3 of 3)

1. Remove the fixing cover and undo the bolt fixing the rear seat belt. 2. Undo the bolts shown and remove the rear pillar cover. 3. Undo the bolts shown and remove the rear access trims for the tailgate hinge fixings. 4. Heat the roof from the outside using an infra red lamp to assist with the separation of the bodyshell lining:

Avoid temperatures exceeding 90°C in order not to damage the paintwork.

5. Cut the lining in a longitudinal direction to allow the subsequent removal of the roof panel from the vehicle, then extract it through the tailgate housing. (Do not pull the roof panel downwards so as not to distort it).