Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)10 · 70 Bodywork
10 · Body & interior

Paat49mot

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Replacing structural body panels › Paat49mot
70 BodyworkPaat49mot

PAAT49MOT

Positioning the replacement part

  1. Position the replacement part on the vehicle and on the template and, after having checked that it is perfectly superimposed, mark the parts to be removed on the vehicle (1) and on the replacement reinforcement (2).
Diagram showing a vehicle body panel with cutting line marked as 1 and a replacement reinforcement part with cutting line marked as 2. Small inset diagrams show directional arrows and a tool.
  1. Remove the part previously marked with the cutting line (1) from the bodyshell, taking care not to damage the internal reinforcement.
  2. Remove the section of the reinforcement marked previously with the cutting line (2) from the replacement part.
Diagram showing the cut section of the vehicle body panel marked as 1 and the corresponding cut section of the reinforcement marked as 2. An inset shows a welding tool.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.