Cam shaft left rigid mount - r r

Make

Fiat

Model

Doblò Factory Service Manual

Year

2000–2010

Section

Power unit supports › Cam shaft left rigid mount - r r

EngineCam shaft left rigid mount - r r

Cam shaft left rigid mount - r r

Operation 1008a46 · POWER UNIT FASTENINGS

1.4 8v

Removing

Proceed with the removal

Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.

Op. 1008B10 FLEXIBLE MOUNTING FOR POWER UNIT FRONT SUPPORT (TIMING SIDE) - REPLACE

1. Undo the bolts (1a) and remove the power unit timing side rigid support (1b).

Refitting

1. Place the power unit timing side rigid support (1a) in its housing and secure it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	dia	Value (daNm)
1b	Bolt	RIGID ENGINE MOUNT, TIMING SIDE	M8	(Engine crankcase side) 2.0 - 2.4

	Fastening	Component	dia	Value (daNm)
1b	Bolt	RIGID ENGINE MOUNT, TIMING SIDE	M10	(Engine crankcase side) 5.4 - 6.6

Proceed with the refitting

Op. 1008B10 FLEXIBLE MOUNTING FOR POWER UNIT FRONT SUPPORT (TIMING SIDE) - REPLACE

Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.

08 Engine