Gearbox side mount flexible block - replace

Operation 1008b30 · Power unit mounting blocks

1.4 8v

Removing

Position the vehicle on the lift.

Turn the ignition key to the OFF position.

Disconnect the negative battery terminal.

Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.

Partly raise the lift.

Position an arm lift under the engine to support it during the dismantling of the flexible block.

1. Undo the nut fixing the engine support to the flexible mounting.

2. Undo the bolts securing the flexible mounting to the bodyshell.

3. Remove the flexible mounting from the engine compartment.

Refitting

1. Position the flexible block (1a) in its seat in the engine compartment, tighten bolts (1b) securing it to the body and tighten to the specified torque.

2. Tighten the nut fixing the engine mount to the flexible mounting to the recommended torque.

Remove the arm lift used for supporting the power unit.

Lower the lift.

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R.

Op. 5530B10 BATTERY - R+R

Op. 7055B54 PROTECTION/GUARD UNDER ENGINE - R.R.

Connect the negative battery terminal.

Remove the vehicle from the lift.