Speedometer not working
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Instrument panel › Speedometer not working
Fault diagnosisSpeedometer not working
SPEEDOMETER NOT WORKING
| Results of the tests | ||||
| 1 | 'INSTRUMENT PANEL CONTROL UNITS TEST WITH EXAMINER DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
Carry out the active diagnosis of the speedometer. The speed indicator should reach the end of the scale | Continue to Step 2 | The speedometer does not reach the end of the scale | Replace the instrument panel Op. 5560B11 | |
| 2 | 'BODY COMPUTER CONTROL UNITS TEST WITH EXAMINER DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Carry out the active diagnosis of the 'vehicle speed signal (CAN)'. The speed indicator should reach around 100 km/h | Continue to Step 3 | The speedometer does not indicate around 100 km/h | Replace the Body Computer Op. 5505A32 | |
| 3 | CHECK SPEEDOMETER ELECTRICAL CIRCUIT | All OK | Problems met | Operation |
| Check speedometer sensor earth-signal supply See E4010 INSTRUMENT PANEL | Continue to Step 4 | Cables broken and/or not insulated | Restore continuity and/or insulation See E4010 INSTRUMENT PANEL | |
| 4 | CHECK SPEEDOMETER SENSOR | All OK | Problems met | Operation |
| Check the operation of the speedometer sensor | Continue to Step 5 | Speedometer sensor not working. | Replace the speedometer sensor Op. 2180A36 | |
| 5 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Search for the fault starting from another symptom' | ||
Parts & tools for this job For 2000 Fiat Doblò
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Doblò
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.