Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Doblò Factory Service Manual (2000-2010)22 · Fault diagnosis
22 · Diagnostics

Climate control system noisy / (in the engine compartment)

Make
Fiat
Model
Doblò Factory Service Manual
Year
2000–2010
Section
Noisy / vibrations › Climate control system noisy / (in the engine compartment)
Fault diagnosisClimate control system noisy / (in the engine compartment)

CLIMATE CONTROL SYSTEM NOISY / (IN THE ENGINE COMPARTMENT)

The climate control works properly, but there is too much noise coming from the engine compartment

Results of the tests
0PRELIMINARY CHECKSAll OKProblems metOperation

Disconnect the services belt and check whether the noise disappears.

Do not let the engine run for long with the belt disconnected

Check whether the noise only occurs with the engine switched off

Continue to Step 2The noise disappears when the services belt is disconnectedSee table S10 ENGINE WHILSTLING / SERVICES BELT NOISY
The noise only occurs with the engine switched offCheck that it is not coming from the electric fan
The noise does not disappearContinue to Step 1
1CHECKING PIPE AND COMPONENT FASTENINGSAll OKProblems metOperation

Check that the compressor and the system pipes and components are correctly fixed.

In the following order:

  • drier filter fixing
  • pipes fixing (with bands and spacers)
  • no interference between the pipes and other components in the engine compartment
  • Compressor fixing to the engine
Continue to Step 2Components fixing not correctRestore the correct tightening. If necessary, replace the bands or spacers Op. 5040A14
Interference in the engine compartmentRestore the correct pipe layout
2CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentFault persistsSearch for the fault starting from another symptom'

Parts & tools for this job For 2000 Fiat Doblò

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.