Noise gearbox / round bends
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Noisy / vibrations › Noise gearbox / round bends
Fault diagnosisNoise gearbox / round bends
NOISE GEARBOX / ROUND BENDS
Whilst driving round a bend (right or left) there is a low frequency noise from the area of the gearbox.
| Results of the tests | ||||
| 0 | FIRST CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
| Whilst driving, steer to the right or the left and check the onset of the noise. | Continue to Step 3 | Noise does not vary with the steering angle | Continue to Step 1 | |
| Noise varies with the steering angle | Continue to Step 2 | |||
| 1 | DIFFERENTIAL CHECK | All OK | Problems met | Operation |
| Check the differential: In particular, check the bearings | Continue to Step 3 | Bearings damaged | Replace the bearings Op. 2110D26 | |
| Internal gears worn or damaged | Overhaul or replace the differential housing Op. 2110D10 | |||
| 2 | JOINTS CHECK | All OK | Problems met | Operation |
| Check the transmission joints | Continue to Step 3 | Wheel side joint damaged | Replace the joint Op. 2710A54 | |
| Differential side joint damaged | Replace the joint Op. 2710A52 | |||
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Search for the fault starting from another symptom' | ||
Parts & tools for this job For 2000 Fiat Doblò
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Doblò
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.