Noise front / round bends
- Make
- Fiat
- Model
- Doblò Factory Service Manual
- Year
- 2000–2010
- Section
- Noisy / vibrations › Noise front / round bends
‹ Prev Noise front / driving in a straight line on an even roadNext › Climate control system noisy / (in the engine compartment)
Fault diagnosisNoise front / round bends
NOISE FRONT / ROUND BENDS
| Results of the tests | ||||
| 1 | All OK | Problems met | Operation | |
|---|---|---|---|---|
| Carry out a road test at low speed steering to the left and to the right | Continue to Step 2 | A grinding noise is heard. Noise intensity changes greatly according to steering angle. Constant velocity joint noisy. | Replace constant velocity joint on the side the noise is coming from | |
| Turning noise is heard, differential noisy | Service differential | |||
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Search for the fault starting from another symptom' | ||
‹ Prev Noise front / driving in a straight line on an even roadNext › Climate control system noisy / (in the engine compartment)
Parts & tools for this job For 2000 Fiat Doblò
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Doblò
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.