Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Doblò Factory Service Manual (2000-2010)13 · Steering
13 · Steering & suspension

Power steering link - r r

Make
Fiat
Model
Doblò Factory Service Manual
Year
2000–2010
Section
Power steering › Power steering link - r r
SteeringPower steering link - r r

Power steering link - r r

Operation 4130A16 · Power steering box

Removing

Measure the length of the steering rods to be used for refitting.

1. Loosen the nuts securing the steering rods.

2. Undo the rods from the power steering box and remove them.

Power steering link - r r

Refitting

Tighten the steering rods on the power assisted steering box.

Check that the length of the adjustable steering rods is the same as that measured during the removal.

Tighten the adjustable rod nuts to torque.

FasteningComponentØ

Value

(daNm)

NutADJUSTABLE LINK BALL JOINTSM14 x 1.5(On steering box arm) 8.5

Parts & tools for this job For 2000 Fiat Doblò

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.