Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Doblò Factory Service Manual (2000-2010)19 · Wiring diagrams and electrical functions
19 · Electrical

Trip computer - description

Make
Fiat
Model
Doblò Factory Service Manual
Year
2000–2010
Section
Instrument panel › Trip computer - description
Wiring diagrams and electrical functionsTrip computer - description

TRIP COMPUTER - DESCRIPTION

1.4 8v, 1.6 16v, 1.3 JTD 16V, 1.9 JTD 8V · from 12/03 · MY 2005

The Trip Computer shows vehicle trip, consumption and mileage details on the control panel display.

On versions with a COMFORT panel, two types of fully independent Trip Computer modes (A and B) are available for the Comfort panel. The displays can be activated by pressing the TRIP button on the right steering wheel stalk switch.

Only the Trip A mode is available for the MODAL and STRIP panels.

Instantaneous consumption cannot be displayed on the STRIP panel.

On these last two versions, the display can be activated by pressing the key on the right steering wheel stalk (MODALE) or directly on the control panel (STRIP).

For the STRIP panel, used only for the Natural Power - 1596 16V BPW version, mean fuel consumption is calculated only for petrol fuel consumption.

The data display mode follows a preset order:

TRIP A:

- Range [km] or [miles]:

- Distance travelled [km] or [miles]:

- Average fuel consumption [Km/l]

- Instant consumption [l/100 km] or [mpg]:

- Average speed [km/h] or [mph]:

- Journey time [hh:mm]:

TRIP B (COMFORT version only)

- Distance travelled [km] or [miles]:

- Average fuel consumption [Km/l]

- Average speed [km/h] or [mph]:

- Journey time [hh:mm]:

These values are available due to instantaneous mileage, fuel level and fuel tank capacity information received and managed by the body computepr, instantaneous fuel consumption information received by the engine management control unit and, lastly, the journey time managed by an internal clock.

All information appears individually in the display

The TRIP key (stalk or instrument panel) can be used to zero the parameter on view at that time and also to move on to the next parameter.

The two keys to the right of the panel can also be used to adjsut the time shown on the display. The STRIP version includes only one adjustment key.

The wiring diagram describes the operation of the signals used to display the Trip Computer data.

For more details,

See descriptions 5560 INSTRUMENTS

Parts & tools for this job For 2000 Fiat Doblò

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.