3. Refitting
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Camshafts: removing - refitting › 3. Refitting
01 Engine - 2.2 HDi3. Refitting · page 1 of 6
Figure : B1DG0T5D
Remove :
- The camshaft bearing cap cover (17); Using a chisel (at "a")
- The inlet camshaft (18)
- The exhaust camshaft (19)
CAUTION : Clean the gasket faces with an approved descaling product. Do not use abrasives or sharp tools on the joint faces. The gasket faces must not have any traces of knocks or scores.
3. Refitting
CAUTION : Adhere to the tightening torques.
CAUTION : Clean the bolt threads and taps before refitting.
Parts & tools for this job For 2006 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.