Workshop Manuals Factory service & repair Fiat
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)03 · 03 Engine - 3.0 HDi
03 · Engine

2. Stripping (page 3 of 15)

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Engine: stripping-assembling
03 Engine - 3.0 HDi2. Stripping · page 3 of 15

Remove :

  • The circlip (9)
  • The filler orifice filter (10)
Engine auxiliary drive belt assembly showing crankshaft pulley (11), tensioning roller (12), air-conditioning compressor (13), elastic auxiliary drive belt (14), and positioning tool [1]

Figure : B1CM00JD

CAUTION : Mark the direction of rotation of the elastic auxiliary drive belt (14) if it is to be reused.

Position the tool [1] on the crankshaft pulley (11).
Turn the crankshaft pulley (11) clockwise using the bolt until the elastic auxiliary drive belt (14) is removed completely, then until the tool [15] disengages.
Remove (according to equipment) :

  • The elastic ancillary belt (14)
  • The tensioning roller (12)
  • The air-conditioning compressor (13)

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.