2. Removing (page 2 of 3)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Timing chain: removing - refitting
03 Engine - 3.0 HDi2. Removing · page 2 of 3
Disconnect the connector ( as "a").
Remove :
- The dipstick (4)
- The casing (3)
Immobilise the accessories drive pulley (5); Using tool [0191-2K].
Remove :
- The bolt (6)
- The ancillary drive pulley (5)
- The cap (7)
Insert the tool [0191-2A] (at "b"); Fit the crankshaft setting rod; Using tool [0191-2A].
Remove :
- The tube (8)
- The cap (9)
- The dipstick guide (10)
- The cover (11)
- The tensioning roller (12)
Parts & tools for this job For 2006 Fiat Ducato
- PARTTiming belt kitSearch: Fiat Ducato 2006 timing belt kit
- TOOLEngine timing tool setSearch: Fiat engine timing tool set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.