1. Tooling (page 6 of 7)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Windscreen: removing - refitting
10 Body front section1. Tooling · page 6 of 7
Figure : C5CG1DZD
Put the winding device [1354-AZ] in place as indicated on the diagram .
When pulling the square section cutting wire taut, check that the wire is placed correctly under the lip of the windscreen seal.
Cut the first part as far as the lower right corner.
N.B. : At the slightest resistance of the wire on cutting, slacken it and help it to pass the obstacle (support shims excessively thick bead of adhesive or panel junction).
![Interior view of a vehicle showing the winding device [1354-AZ] positioned at the top of the windscreen with a cutting wire extending across, and callout [1354-E] indicating the wire path near the rearview mirror area.](/fiat/ducato-2006-2017/assets/page_1059_fig01.png)
Figure : C5CG1E2D
Move the winding device [1354-AZ] as indicated on the diagram and continue cutting.
Parts & tools for this job For 2006 Fiat Ducato
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.