6. Clips (page 2 of 2)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Driveshaft gaiters: replacement
28 Driveshafts and wheels6. Clips · page 2 of 2
6. Clips (page 2 of 2) – diagram from the 28 Driveshafts and wheels chapter of the Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017) factory manual.
![Tool [0413] clamped around a driveshaft joint and gaiter](/fiat/ducato-2006-2017/assets/page_3122_fig01.png)
Figure : B2FH00BD
Tighten the wing clips; Using the tools [0413] or [0409].
![Tool [0413] tightened on a driveshaft gaiter with dimension A indicating contact](/fiat/ducato-2006-2017/assets/page_3122_fig02.png)
Figure : B2FH00CD
Tighten the clips : Until there is contact "A" = 0 mm.
Parts & tools for this job For 2006 Fiat Ducato
- PARTWheel bearingSearch: Fiat Ducato 2006 wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Fiat Ducato 2006 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.