WINDSCREEN WIND NOISE LOCATION

Check 7035AA

Tape the various areas illustrated in the diagram using bodywork gummed paper.

Carry out a road test letting the vehicle gradually reach the speeds where the noise starts: if the wind noise persists, check that the windscreen has been correctly taped and also check whether the source of the wind noise might be coming from the area of the sun roof.

Remove the gummed paper from area A and repeat the road test: If the wind noise persists, locate the noise in the front door area, see TEST 7005 A - FRONT DOOR WIND NOISE LOCALISATION.

Remove the gummed paper from area B (window only) and check the condition of the window moulding trim (no wrinkles or creases). Replace the moulding if necessary, removing the window.

Op. 7035A18 WINDSCREEN GLASS - R.R INCLUDING CLEANING HOUSING